Hall Effect Speed Sensors

Zero speed

Hall effect speed sensors provide speed measurement down to zero speed

Sense external magnetic fields

The HES sensors provide pulse on detection of an external magnetic field (e.g. rotating magnets, magnetized rotors).

Gear tooth Hall effect sensors

Our 'N' series Hall effect sensors contain in internal bias magnet, allowing detection of ferrous objects e.g. gear teeth.

hall effect speed sensors: HES3660S

Our Hall effect speed sensors are designed to measure down to zero speed. A Hall effect switch provides an output pulse in response to the presence of an external magnetic field, due to the change in magnetic flux density. The "N" series gear tooth Hall effect speed sensors instead detect ferrous material. These contain an internal magnet which creates a bias field, the presence of the gear tooth results in an increase in the magnetic flux density causing the device to switch.

Hall effect speed sensors are active devices, requiring a power supply. We typically use an integral MS 10SL-3P connector, though models with flying leads or a 3-core screened captive cable are also available.

Reliability, Guaranteed

We place great emphasis on the quality and reliability of our product and all of our hall effect sensors are supplied with a 2 year warranty.

Standard Hall effect sensors

 

ModelSensor TypeImperialMetricThread Length (mm)Sensing FaceTerminationData Sheet
HES3660SMagnetic field5/8" x 18 tpi UNF-2AM16 x 1.5 6g60Stainless steelMS 10SL-3Ppdficon_large
HES3660NGear tooth5/8" x 18 tpi UNF-2AM16 x 1.5 6g60Epoxy sealedMS 10SL-3Ppdficon_large
HES3660NSGear tooth5/8" x 18 tpi UNF-2AM16 x 1.5 6g60Stainless steelMS 10SL-3Ppdficon_large
HES3638NGear tooth5/8" x 18 tpi UNF-2AM16 x 1.5 6g38Epoxy sealedMS 10SL-3Ppdficon_large
HES3676Magnetic field5/8" x 18 tpi UNF-2AM16 x 1.5 6g76Epoxy sealedMS 10SL-3Ppdficon_large
HES3676NSGear tooth5/8" x 18 tpi UNF-2AM16 x 1.5 6g76Stainless steelMS 10SL-3Ppdficon_large
HES3676NVGear tooth - pulse to supply5/8" x 18 tpi UNF-2AM16 x 1.5 6g76Epoxy sealedMS 10SL-3Ppdficon_large
HES36102Magnetic field5/8" x 18 tpi UNF-2AM16 x 1.5 6g102Epoxy sealedMS 10SL-3Ppdficon_large
HES36102NGear tooth5/8" x 18 tpi UNF-2AM16 x 1.5 6g102Epoxy sealedMS 10SL-3Ppdficon_large

Custom Hall effect sensors

We manufacture Hall effect sensors to customer specification, including thread type/length, input/output voltage, termination, body material/style.

Contact us

For further information or to discuss your requirements

Contact us